Low loader trailerMÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Low loader trailer
MÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Fast pris plus moms
32 950 €
(39 210 € brutto)
Tillverkningsår
2025
Skick
Ny
Plats
Egestorf 

Grundläggande data
Pris och plats
Fast pris plus moms
32 950 €
(39 210 € brutto)
- Säljarens plats:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ringa
Tekniska detaljer
Mått och vikt
Totalvikt:
14 400 kg
Maximal lastvikt:
10 360 kg
Lastutrymmets längd:
6 270 mm
Lastutrymmets bredd:
2 470 mm
Lastutrymmeshöjd:
400 mm
Axlar och hjul
Axelkonfiguration:
2 axlar
Erbjudandets detaljer
- Annons-ID:
- A116-45-309
- Referensnummer:
- 6159
- Uppdatering:
- senast den 11.06.2026
Beskrivning
* ETÜ-TA-ER 14.4:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
Codpfxsndpn Se Anvshd
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Annonsen har översatts automatiskt. Översättningsfel kan förekomma.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
Codpfxsndpn Se Anvshd
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Annonsen har översatts automatiskt. Översättningsfel kan förekomma.
Leverantör
Observera: Registrera dig gratis eller logga in, för att få tillgång till all information.
Registrerad sedan: 2001
163 Annonser online
Skicka förfrågan
Telefon & Fax
+49 40 33... annonser
Dessa annonser kan också vara av intresse för dig.
Lyckad
Ditt meddelande har skickats.
Småannons
Egestorf
931 km
Släpvagn med arbetsplattform
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Din annons har raderats framgångsrikt
Ett fel har uppstått









































































