CurtainsiderFliegl
SDS 390 RoadRunner
Curtainsider
Fliegl
SDS 390 RoadRunner
EXW Fast pris plus moms
9 500 €
(11 305 € brutto)
Skick
Begagnad
(helt fungerande)
Plats
Triptis 

Grundläggande data
- Beteckning:
- Curtainsider
- Tillverkare:
- Fliegl
- Modell:
- SDS 390 RoadRunner
- Fordonnummer:
- WFDFLT33902017848
- Skick:
- begagnad
- Funktionalitet:
- helt fungerande
Pris och plats
EXW Fast pris plus moms
9 500 €
(11 305 € brutto)
- Plats:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Ringa
Tekniska detaljer
Mått och vikt
Totalvikt:
35 000 kg
Tomvikt:
6 537 kg
Maximal lastvikt:
28 463 kg
Total längd:
13 850 mm
Total bredd:
2 550 mm
Total höjd:
4 000 mm
Lastutrymmets längd:
13 650 mm
Lastutrymmets bredd:
2 480 mm
Lastutrymmeshöjd:
2 790 mm
Axlar och hjul
Axelkonfiguration:
3 axlar
Fjädring:
luft
Däcksstorlek:
385/65 R22.5"
Fler detaljer
Första registrering:
10/2015
Färg:
silver
Erbjudandets detaljer
- Annons-ID:
- A905-86-31
- Referensnummer:
- 37357
- Uppdatering:
- senast den 06.06.2026
Beskrivning
The images are archive images! The vehicle may be in use!
Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm.
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h).
Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg.
Dcodpfjkyrmisx Adtjp
Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection.
Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.
Annonsen har översatts automatiskt. Översättningsfel kan förekomma.
Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm.
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h).
Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg.
Dcodpfjkyrmisx Adtjp
Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection.
Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.
Annonsen har översatts automatiskt. Översättningsfel kan förekomma.
Leverantör
Observera: Registrera dig gratis eller logga in, för att få tillgång till all information.
Registrerad sedan: 2006
198 Annonser online
Skicka förfrågan
Telefon & Fax
+49 36482... annonser
Dessa annonser kan också vara av intresse för dig.
Lyckad
Ditt meddelande har skickats.
Småannons
Triptis
1 126 km
öppen semitrailer med kapell
FlieglSDS 390 RoadRunner mit Coilmulde
FlieglSDS 390 RoadRunner mit Coilmulde
Lyckad
Ditt meddelande har skickats.
Småannons
Triptis
1 126 km
öppen semitrailer med kapell
FLIEGL3-Achs Gardine SDS 390 RoadRunner
FLIEGL3-Achs Gardine SDS 390 RoadRunner
Din annons har raderats framgångsrikt
Ett fel har uppstått



























































